150 GPH OIL CENTRIFUGE / MOTOR PACKAGE for WVO / OIL and BIODIESEL

Description

150 GPH Centrifuge and 1/2hp Motor/Pump
If you're thinking of driving on Waste Vegetable Oil, Waste Motor Oil, Transmission Fluid or any other alternative fuel , visit our Forum Library. We have gathered over 35+ forums in one place dealing with oil filtration and specific vehicles.
Oil centrifuges
are used in the alternative fuels market for cleaning wvo, wmo, and other biofuels. To make biodiesel you need to process vegetable oil or you can filter your waste vegetable oil or waste motor oil to below .5 micron
Specifications
Waste oil centrifuge comes with 200 PSI liquid filled pressure gauge, 3/8" ball valve, 2 - 3/8" brass tees, 2 - 3/8" brass hose barbs, and 3/8" close nipple.
The flow rate capacity of the WVO
centrifuge
is 2.5 GPM or 150 gallons per hour. The oil cleaning centrifuge measures 6.5" in diameter by 10.5" tall. Rotor is capable of holding 42 oz. of contaminants. One 55 gallon drum of WVO/WMO will take approximately 20 minutes to process. The viscosity is the critical part of this equation. Waste oil centrifuge generates (at 85 PSI) a centrifugal force 2,000 times greater than gravity at 6400 RPM. . The centrifuge for WVO will clean used motor oil or biodiesel in the wash process. The oil centrifuge will remove magnesol with more than one pass necessary. At the end of the process, you can also remove glycerin, which requires no heating. More than one pass may be needed.
Carbonator Mount Pump, Rotary Gear, Spur, 1/2 HP, Voltage 115/230, ODP Motor Enclosure, Carbonator Motor Frame, 1725 Max RPM, 4.4 GPM Max, Max Operating PSI 100, Port Size 3/8 In, 400 Max SSU, GPM @ Freeflow 4.4, @ 40 PSI 3.8, @ 80 PSI 3.2,
Max Temp 210 F,
With Relief Valve, Pump Body Material Cast Iron, Color Black, Steel Gears, Viton Mechanical Seal, Viton O-Ring, Steel Shaft Material. Power cord not included. 1yr. warranty on motor/pump.
All internal centrifuge parts certified nickel plated to prevent rust and corrosion.
Every product is warranted to the original purchaser to be free from defects in material and workmanship for a period of five years.
Bushings and shaft wear are not covered under this warranty
Email for  INTERNATIONAL SHIPPING
We are not responsible for international custom or VAT charges.