300 GPH CENTRIFUGE for WVO /OIL and BIODIESEL

Description

300 GPH CENTRIFUGE
If you're thinking of driving on Waste Vegetable Oil, Waste Motor Oil, Transmission Fluid or any other alternative fuel , visit our Forum Library. We have gathered over 35+ forums in one place dealing with oil filtration and specific vehicles.
See videos
at Centrifuge for Dummies
The
wvo centrifuge
has the ability to clean your oil to below .5 micron while dewatering.
Specifications
The flow rate capacity of the wvo
centrifuge
is 5.0GPM or 6.7 GPM depending on the nozzles used. The wvo centrifuge measures 9" in diameter by 13.5" tall. Rotor is capable of holding 84 oz. of contaminants. One 55 gallon drum of waste vegetable oil will take approximately 8 minutes to process. WVO centrifuge generates (at 85 PSI) a centrifugal force 2,000 times greater than gravity at 4500 RPM. You need to purchase a 1 HP motor with pump for wvo centrifuge operation. The centrifuge for wvo  will filter wvo, filter wmo, filter hydraulic oil, filter gear oil or dewater biodiesel. The centrifuge will remove magnesol with more than one pass necessary. At the end of the process, you can also remove glycerin, which requires no heating. More than one pass may be needed.
All internal centrifuge parts certified nickel plated to prevent rust and corrosion.
Every product is warranted to the original purchaser to be free from defects in material and workmanship for a period of five years.
Bushings and shaft wear are not covered under this warranty
Call for     INTERNATIONAL SHIPPING
We are not responsible for international custom or VAT charges.
For all your oil filtration
needs visit us at
Pa Biodiesel Supply